Gate Remote Control Switch 433 Mhz Universal Remote Control for Gate/Garage Door | Remote Control

Description

Product Description
Specification:
Origin: Mainland China
Use: Electric Door
Wireless Communication: RF
Working voltage: DC12V
Working temperature: -40 degrees to 80 degrees
Working frequency: 433MHZ
Output mode: jump switch, inching, self-locking, interlocking (adjustable)
Remote control distance: 20-40 meters
Product Size:
Switch size: 40x40x25mm 1.57×1.57×0.98inch
Controller size:55x30x12mm/2.17×1.18×0.47inch
product weight:
Control board: 24g
Remote control weight: 30g
Product material: ABS
Features:
1. Wide scope of application. This product is controlled by an intelligent microprocessor and can be applied to garage door control, lighting control, remote control curtains, access control systems and various motor control systems.
2. Easy to install. Small size, easy installation, safe and reliable use and so on.
study method:
After the controller is powered on, the indicator light is always on. Then long press the learning button 2~3 and the indicator light will go out automatically. Release the learning button and press any key on the remote control. The indicator light will flash 5 times quickly, indicating successful learning.
Note: This controller can learn remote controls with 16 different codes and arbitrary buttons such as fixed codes and learning codes. If the number exceeds the limit, the earliest learned remote controls will be cleared in sequence.
Clear method:
Press and hold the learning button for about 8 seconds, and the indicator light turns from off to back to steady light, indicating that the clearing is successful.
Connection method:
Connect to 12V DC output: The input terminal of the learning 12-volt single-channel remote control switch is connected to a 12V DC power supply. The common terminal of the output terminal is connected to the positive terminal of 12V. The positive terminal of the bulb is connected to the normal open end of the output terminal. The negative terminal of the bulb is connected to the power supply. A simple circuit to control the light bulb on and off is designed.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
Remote Control X1
Dc12v Intelligent Single-Channel Controller X1