220V 2CH RF Remote Control AC85V-250V 315MHz Wireless RF Switch for Light Gate | Remote Control

Description

Product Description
Specification:
Certification: CE
Origin: Mainland China
Use: Computer,Switch,Air Conditioner,Universal,Projectors,Camera / Video Camera,Speaker,Lighting,Electric Door,Automated curtains
Wireless Communication: RF
Model Number: Remote Control Switch
Product model: AK-RX220V-2C
Color classification: 220V 2-way + 1 X push cover medium power 2-key remote control, 220V 2-way + 2 X push cover medium power 2-key remote control
Operating frequency: 315MHz
Working mode: Inching mode, self-locking mode, interlocking mode
Output mode: Terminal blocks
Demodulation mode: ASK
Shell material: ABS
Control mode: Same frequency remote control
Working voltage: AC85-250V
Standby current:
No load working current: 90mA
Receiving sensitivity: – 105dBm
Single circuit maximum current: ≤ 10A
Operating temperature: – 20-70 ℃
Product size: 75x54x28.5mm/2.95×2.13×1.12in (with shell)
Description of operating functions:
(1) Code pairing operation:
Inching mode: Press the learning key once, the indicator light will be on, press the A key briefly, the indicator light will flash twice, then press the B key briefly, the indicator light will flash twice again, indicating that the code learning is successful, and both channels are in "Inching Mode".
Self locking mode: Press the learning key twice, the indicator light will be on, press the A key briefly, the indicator light will flash twice, then press the B key briefly, the indicator light will flash twice again, indicating that the code learning is successful, and both circuits are in "self-locking mode".
Interlock mode: Press the learning key three times, and the indicator light will light up. Press the A key briefly, and the indicator light will flash twice. Then press the B key briefly, and the indicator light will flash twice again, indicating that the code learning is successful, and both channels are in "interlock mode".
(2) Clear code operation: Press and hold the learning button for about 8 seconds, and the indicator light turns on (flashes 4 times) to off, indicating that the code is cleared successfully.
Description of code clearing mode:
Inching mode: press button A of remote controller, one relay of controller will be closed, release button A of remote controller, and one relay of controller will be disconnected
Self locking mode: press button A of remote controller once, and 1 relay of controller will be closed; press button A of remote controller again, and 1 relay of controller will be disconnected
Interlock mode: press button A of remote controller once, and one relay of controller will be pulled in; press button B again, and two relays of controller will be pulled in, and one relay of controller will be disconnected.
Matters needing attention:
(1) The supply voltage must not exceed the operating voltage.
(2) Keep out of reach of children.
(3) In the environment with large wireless interference, the control distance may be reduced.
(4) It is prohibited to use it in a humid environment, otherwise the controller may be damaged.
(5) It is forbidden for non professionals to dismantle the equipment under high voltage.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
01:
1 X Receiver
1 X Remote Control
1 X PE Closure Pocket
02:
1 X Receiver
2 X Remote Controls
1 X PE Closure Pocket