Remote Control 315 MHz/433 MHz Receiver Module for Electric Gate Garage Door | Remote Control

Description

Product Description
Specification:
Operating frequency: 315 MHz/433 MHz (optional)
Battery type: 12V, 23A alkaline battery;
Working method: copy;
Shell material: ABS;
Product size: 66 * 41 * 13mm/2.60 * 1.61 * 0.51in (including shell);
Product weight: 25g (including shell, excluding keychain).
Electrical Parameters
Working voltage: DC9-12V
Emission current:
Quiescent current:
Transmission power:+3-6dBm
Working temperature: -20-70 ℃
Function Description
(1) Copy Code Matching Operation
Normal copy operation: Press a single button on both the copied remote control and the copy remote control at the same time, until the copy remote control indicator light changes from fast to steady, and then release the two remote control buttons. A steady light indicates successful code matching. Follow this method to operate other buttons in sequence until all buttons are copied.
Scrolling code copy operation: Press a single button on both the copied remote control and the copy remote control at the same time, until the copy remote control indicator light changes from fast to steady, and then release the two remote control buttons. A steady light indicates successful code matching. After copying one button, other buttons are automatically generated without the need for copying.
Note: After copying the remote control, the code needs to be cleared before it can be copied again.
(2) Clear code operation
Press and hold the copy remote control A and B buttons simultaneously until the indicator light flashes quickly, and then briefly press the A button three times to clear the code (while the B button is held down).
(3) Recovery code operation
Press and hold the copy remote control C and D buttons simultaneously until the indicator light flashes quickly to restore the previously cleared remote control code.
Copier Chip
Ordinary remote control: 2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6270, HT6010, HT6012, HT6014, SMC918, Series, 527, 1527, 2240
Rolling code remote control: BFT MITTO2 MITT04, FAAC XT4 433RC, Motorline MX4SP DSM, BENINCA TO GO WV, KEY TXB-42R, DEA MIO TR2, DOORHAN TX4, ATA PTX4, Peccinin TX3C, NICE FLORS, GBD AU1600, Centurion NOVA, V2, Nice Smilo, AN MOTOR AT-4, NOVOFERM, ROSSI, FADINI JUBI, Hiland
Attention
(1) The battery voltage should not exceed the operating voltage range.
(2) When copying remote controls, try to keep the two remote controls close together as much as possible, otherwise there may be copying exceptions.
(3) In environments with high wireless interference, remote control distance may decrease.
(4) The remote control is suitable for use within a range of 30-50 meters. Do not use it for long-distance remote control.
(5) Do not use in damp environments, as it may cause damage to the remote control.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Remote Control